Select Page

A clock that stopped running usually needs a new movement, not a new clock. To pick the right one you need three things: the thickness of the dial, the length of the hands, and the kind of movement the clock had (plain, pendulum or chime). Get those right and the swap is a short job.

Between Thanksgiving and New Year’s, a lot of mantel and wall clocks come down off the wall for company, and the ones that quit end up on a repair counter. Here is how we match movements over the phone, using the sizes we stock.

What does a clock movement do?

The movement is the small box behind the dial that turns the hands. In a quartz movement a battery powers a crystal oscillator, and a tiny motor steps the gears forward once a second. The hands press onto a threaded shaft that comes through a hole in the center of the dial, and a hex nut on the front holds the whole thing in place.

That shaft is where most wrong orders start.

How do I know which shaft length I need?

Measure the full thickness of whatever the shaft passes through, then choose a shaft longer than that. Include the dial and any face plate or spacer behind it. The shaft has to leave enough thread showing on the front for the washer and hex nut to grab.

Too short, and the nut won’t catch. Too long, and the hands sit far off the dial, which looks wrong and can let the hands hit the glass.

Our quartz clock movements come in these shaft sizes:

  • Mini-step quartz: 3/16″, 5/16″, 7/16″, 11/16″ and 15/16″
  • Standard quartz: 7/16″, 11/16″ and 15/16″
  • Mini pendulum quartz: 5/16″ and 11/16″
  • Westminster chime with pendulum: 7/16″ and 11/16″

A quick example. A painted metal dial is thin, so a 3/16″ shaft often works. A 1/4″ wood dial needs more, so 5/16″ or 7/16″ is where to start, depending on how much thread the nut needs. Thick wood or stone faces push you toward 11/16″ or 15/16″.

Use calipers if you have them. A ruler held against the edge of the hole works in a pinch. If your number lands right between two sizes, call us with the measurement before you order.

Mini-step, standard, pendulum or chime: which type do I need?

Match what the clock had, then match the job. Here is what each type in our lineup is for, with current prices.

Mini-step quartz, $7.95

The compact, everyday choice for small and medium clocks with light hands. Made in USA. Part numbers C1 CLK 7130, 7160, 7190, 7260 and 7290, from the 3/16″ shaft up to the 15/16″. The hanger is sold separately.

Standard quartz, $15.95

A larger movement for bigger clocks and heavier hands. Made in USA, in 7/16″ (C1 CLK 3190), 11/16″ (C1 CLK 3260) and 15/16″ (C1 CLK 3290). The hanger is sold separately here too.

Mini pendulum quartz, $16.95

For clocks with a swinging pendulum. The quartz keeps the time, and the pendulum swings for looks. Made in USA, in 5/16″ (C1 CLK 2201) and 11/16″ (C1 CLK 2202). With a pendulum clock we also need the pendulum length and size, so measure it before you call.

Westminster chime with pendulum, $49.95

The 4-quarter Westminster chime, the tune most people picture when they think of a grandfather clock, with a pendulum. It comes in 7/16″ (C1 CLK 2508S) and 11/16″ (C1 CLK 2508L). If the clock chimed before, a plain movement will disappoint the owner, so replace like with like.

What size hands do I need?

Measure the dial. The minute hand should reach the minute marks or the outer edge of the numbers. The hour hand is shorter and should stop near the inner edge of the numbers. Measure from the center hole, not edge to edge.

Weight matters as much as length. Long, wide or metal hands ask more of a movement than a small pair of stamped hands. For anything large or heavy, go with the standard movement over the mini-step, and ask us if you’re unsure. Hands also have to fit the shaft they go on, so it’s easiest to sort out hands and movement in the same order.

When is a fit-up the better choice?

When there’s no existing clock to repair. A fit-up is a complete clock insert: movement, dial, hands, bezel and crystal in one sealed unit. You drill a round hole and press it in.

Our clock fit-ups measure 1 7/16″ (36mm) across the face with a 1 3/8″ rear mount, listed at 5/16″ depth. You can pick a white or gold dial, Arabic or Roman numerals, and a gold or silver case. Each one is $15.95.

Fit-ups are what woodworkers, trophy and award shops, and gift makers use for plaques, desk sets and pen stands. This time of year that means handmade Christmas gifts. Drill the hole to match the rear mount and test the fit before you finish the wood.

Should I repair the old movement or replace it?

Replace it. At these prices a quartz movement is not worth taking apart. Before you order, though, try a fresh battery and check the battery contacts for corrosion. A surprising number of “dead” clocks only need that.

If the second hand twitches but won’t advance, or the clock runs slow on a new battery, the movement is worn or the hands are rubbing each other or the glass. Check the hands first. If they’re clear, swap the movement.

One caution. If the clock is a true antique with its original mechanical works, talk to a clockmaker before you convert it to quartz. A conversion can affect what the piece is worth. The American Watchmakers-Clockmakers Institute is a good place to start looking for trained clock people.

Buying movements for a shop or just one clock?

Either works. Anyone can order online. Repair shops, jewelers and gift makers who keep movements on hand can register a free account for trade pricing and order history.

You can also order by phone at 210-341-7783 or toll free at 800-541-5494, Monday through Thursday 8:30 to 5:00 and Friday 9:00 to 4:00 Central. Or come by the store at 431 Isom Rd #109 in San Antonio. Orders ship from our San Antonio warehouse.

Frequently asked questions

How much does a replacement clock movement cost?

At C.R. Time, quartz clock movements run from $7.95 for a mini-step movement to $49.95 for a Westminster chime movement with pendulum. Standard quartz movements are $15.95, mini pendulum movements are $16.95, and complete fit-up inserts are $15.95. Hangers are sold separately on the mini-step and standard movements.

Can I put a quartz movement in an old clock?

Usually, yes. If the dial has a center hole and there’s room behind it, a quartz movement with the right shaft length will drive the hands. Measure the dial thickness and the hand length first. For valuable antiques with original mechanical works, ask a clockmaker before converting, since it can change the clock’s value.

What is the difference between a pendulum movement and a chime movement?

A quartz pendulum movement keeps time with the battery and crystal and swings a pendulum for decoration. A chime movement also plays a tune. Ours plays the 4-quarter Westminster chime and also drives a pendulum. If the clock chimed before, replace it with a chime movement so it sounds the way the owner remembers.

Can you help me match a clock movement over the phone?

Yes. Call 800-541-5494 with the dial thickness, the length of the minute hand, and the pendulum length if there is one. We’ll match it to a movement we stock and tell you what else the job needs. Phones are answered Monday through Thursday 8:30 to 5:00 and Friday 9:00 to 4:00 Central.

Need a movement? Shop clock movements and fit-ups, or contact our San Antonio team with your measurements and we’ll match it for you.